DFM & program flow
From drawing to delivered, in seven steps.
No black boxes. The same engineer reviews your drawing, designs the tool, and follows the part through inspection. No handoffs where intent gets lost.
01Drawing review & DFMSend a 2D or 3D file. We return feasibility, material recommendation, and a target price within 48 hours.
02Tooling designCompaction tooling designed and built in-house, optimized for your geometry and the press that will run it.
03Material & mixingPowder selected by spec, blended with the right lubricant and alloying additions for your properties.
04CompactionPressed net-shape on a machine matched to part size, 6T to 1,000T.
05SinteringHigh-temperature, vacuum, or steam treatment in controlled atmosphere for predictable density and dimensional stability.
06Secondary opsOn-site CNC for tapped holes, milled flats, reamed bores, sizing, and coining as the drawing demands.
07Inspection & ship100% verification of critical dimensions on the Zeiss CMM. Reports and certificates packed with the parts.
What this means for you
A program that does not stall at the next milestone.
When a buyer asks "can you also run this in stainless, hold a gear tooth profile, and add 40,000 units in Q3", the answer should not depend on a phone call to a subcontractor. Here it depends on walking thirty meters across the floor.
- AIn-house tooling design and manufacture. DFM feedback in 48 hours, not after back-and-forth with an external toolmaker.
- BSecondary CNC on site, so net-shape parts needing a tapped hole or reamed bore do not leave the building.
- C100% inspection on critical dimensions, CMM data archived per shipment. PPAP documentation available.
Request a quote
Send your drawing. Get a DFM review in 48 hours.
Upload a 2D or 3D file, tell us the material and volume, and an engineer — not a sales agent — will reply with feasibility, material recommendation, and a target price.